Table of Contents

Introduction

Introducing the Minleon Permanent Lighting System, a revolutionary solution that brings unparalleled illumination and control to your space. Whether you’re coordinating a dazzling light show or sharing the joy of lighting with others, the process of granting user access is now easier than ever. In this comprehensive guide, we’ll walk you through the step-by-step process of setting up new users on the Pixel Dancer app, ensuring a seamless and efficient experience for all.

Preparing for User Access

Before you begin the process of granting user access, there are a few essential steps to ensure a smooth transition. First, make sure the new user has downloaded the Pixel Dancer app from the App Store. This is the primary interface for controlling the Minleon Permanent Lighting System.

Next, ensure that your Minleon controller is properly connected to your home Wi-Fi network. This connection is crucial for allowing multiple users to access and control the lighting system remotely.

Connecting the Pixel Dancer App

Once you’ve confirmed that the new user has the Pixel Dancer app and your controller is connected to your home Wi-Fi, it’s time to set up the app for user access. Open the Pixel Dancer app, and you’ll be prompted to connect to your home Wi-Fi network. Click the “Connect to Wi-Fi” button to verify the connection.

After confirming the Wi-Fi connection, you’ll need to enter the base URL for your Minleon controller. This information was provided during the initial setup process when you connected the controller to your Wi-Fi network. Look for the “Base URL” field in the app’s settings menu, and enter the provided W name as the base URL, followed by “.local”.

Once you’ve entered the correct base URL, the app will save your settings, and you should see the green light on the controller start to flash, indicating a successful connection.

Verifying User Access

To ensure that the new user has full control over the Minleon Permanent Lighting System, test the system by navigating to the main screen and touching the color wheel. If the lights respond accordingly, you’ve successfully granted user access.

If you encounter any issues, such as the lights not changing color, go back to the app’s settings menu and double-check the Wi-Fi connection and base URL. You can also try closing the app completely and reopening it to refresh the connection.

Troubleshooting Tips

In the event that you encounter any difficulties during the user access setup process, here are a few troubleshooting tips to help you get back on track:

  1. Verify Wi-Fi Connection: Ensure that the new user’s device is connected to the same home Wi-Fi network as the Minleon controller.
  2. Check Base URL: Recheck the base URL entered in the app’s settings menu to ensure it matches the W name provided during the initial setup.
  3. Restart the App: If the lights are not responding, try closing the Pixel Dancer app completely and reopening it to refresh the connection.
  4. Contact Support: If you continue to experience issues, don’t hesitate to reach out to the Lights4sale.com support team for further assistance.

FAQ’s

Can multiple users control the Minleon Permanent Lighting System simultaneously?

Yes, the Minleon Permanent Lighting System allows for multiple users to access and control the lighting from their respective devices. This makes it an ideal solution for coordinating light shows, sharing control, or simply allowing everyone to enjoy the lighting experience.

How do I remove a user’s access to the Minleon system?

To remove a user’s access, simply log into the Pixel Dancer app and navigate to the user management section. From there, you can revoke the user’s access or remove them from the system entirely.

Can I set different permission levels for users?

Yes, the Minleon Permanent Lighting System offers the ability to assign different permission levels to users. This allows you to grant full control to some users while limiting the access of others, depending on your specific needs.

How do I update the Minleon controller’s firmware?

Firmware updates for the Minleon controller are typically handled automatically through the Pixel Dancer app. However, if you need to manually update the firmware, you can do so by accessing the controller’s settings menu and following the provided instructions.

What if I need to reset the Minleon controller?

If you need to reset the Minleon controller, you can do so by pressing and holding the reset button on the back of the device for a few seconds. This will restore the controller to its factory settings, allowing you to reconfigure the system as needed.

Conclusion

Unlocking the power of the Minleon Permanent Lighting System has never been easier. By following the step-by-step guide outlined in this blog, you can seamlessly grant user access and share the joy of lighting with others. Whether you’re coordinating a dazzling light show or simply want to give your friends and family the ability to control the lighting in your space, the Minleon system makes it a breeze. Embrace the power of Minleon and let your space shine brighter than ever before.

Unlock the Power of Minleon Permanent Lighting: A Guide to Seamlessly Granting User Access